Fits perfectly
Dem bumpers is bumping’ boi!!!
Great bumper extra thick material high quality paint and love the fact they have pre drilled holes for lights and in the step wells
Style: ARB Front Bumper Deluxe
Vehicle Fit: 2012-2015 Toyota Tacoma
Winch Ready: Accept up to 9K Lbs (Sold Separately)
Steel Material: 0.1" wall thickness tubing
Sensor Allowed: No
Finish: Black Powder Coat
Factory Tow Hooks: Yes
Calling all proud USA body shops, collision shops, and break motor stores: discover our exclusive dealer discount to gain exclusive discounts on the bumpers you want to stock, applicable to all the bumpers from the top brands we sell on our store (Ranch Hand, Fab Fours, and Hammerhead, just to name a few of the many famous and beloved brands we have available). The exclusive dealer discount will range from $50 to $500 and will be applied on top of our original discounts of 30% to 50% off, with the addition of free shipping, free sales tax, and gifts. It’s the best way to save up on quality Steelcraft bumpers, or the latest Iron Cross bumpers, or more.
Interested? Fill out the application form down below with your details. That will help us review your information and decide whether you are eligible for our dealer discount. (Please note that the discount can only be applied prior to purchasing the bumper and not to orders you have already placed. Therefore, make sure to apply before buying the stock you are interested in.)
ARB pioneered the bull bar to withstand extreme conditions. It is dedicatedly designed for maximum strength and reliability. It is highly regarded 4x4 frontal protection for most 4WDs without compromising design and aesthetics.
The ARB Deluxe Bar was crafted to completely replace the factory bumper. It has a fully engineered mounting system and the most extensive of them all. It has a lot of features that guarantee quality and protection for your truck.
Always do your homework before you buy a bumper! Below you can find everything you need to know about bumpers’ weight, thickness, selection, and more.
To help your decision, we’ve compiled a full list of all the bumpers we carry. Compare them by look, function, and price.
Everyone wants to know about the weight of steel bumpers and we’re here to help you out. In this blog, you can find every answer to any question you could have about it.
What’s the right thickness for a bumper? Find out with our guide to bumper thickness.
We work hard to ensure that the prices of our aftermarket truck bumpers are the best available online. That’s why we guarantee that you’ll get the lowest price on all of our bumpers and accessories. Here’s how it works:
Once we confirm that your order is eligible for our price match guarantee, you can be confident that you’re getting the very best deal online.
Whether you’re looking for heavy-duty truck bumpers by Ranch Hand, a winch bumper by Fab Fours, or any other aftermarket truck bumper, if you shop with BumperOnly, you’ll never have to worry about buyer’s remorse.
For any questions about our price match guarantee, feel free to get in touch.
Shop without fear. Let BumperOnly take care of the rest.
Installation isn't too tough for the mechanically inclined. Instructions could be better but since it was my third one I pretty much knew that going in. I had to cut a piece from my original bumper to fill the gap between the ARB bar and the grill. Cutting was simple with a jigsaw. One piece of advice is add 1 1/2 inches to what the instructions say as it will look a lot better ( no more than that or it will hit the mounting bracket and you'll need to cut again). Luckily I found that out online. Also, follow the steps in the instructions to a T as far as when to do something. You have to drill 2 holes into the bracket to lock the bar in near the very end, but if like me you decided to mount the turn signal/fog light insert before drilling those holes you can't fit a drill in the underneath side. Doh! I did the entire install by myself in about 4 hours. If you're also installing a winch and don't have a floor jack (which you'll need to cut a few pieces of 2x6 to rest the bar on) you'll need assistance lifting the bar into place unless you're an extreme weight lifter! Then it's just a matter of adjusting here and there and tightening all the bolts. Another tip if you're doing it solo, take 2 small pieces of and 1x wood and wedge them in between the wings and the fender flares as this will really help when making those final tweaks. It only dropped my front end by 1/2" but I'm installing new shocks and coils as the stock ones will wear quickly with the added weight. Tapping the signal/running lights into the existing harness is a breeze, and they do provide you with scotch locks.
All in all I couldn't be happier!
Very high quality bumper and well thought out design. Quality welds, proper strength steel for bumper and tubes, without being excessive and adding unnecessary weight to the design. The bracket that supports the weight of the bumper uses the OEM factory studs, along with holes that Toyota pre drilled into the frame for extra support. Extremely solid once installed, and definitely will provide great protection against deer and moose up in the Northwoods here. Was slightly difficult to get the bumper properly aligned, but proved no problem with a second set of hands to help. The optional light kit that came with the bumper was ok, fog lights were sealed and of good quality. Although the marker/turn lights are not of the best quality, and are not sealed from the elements. This can be remedied with some silicone, and using properly insulated splices when connecting to factory wiring. Mark at BumperOnly.com provides great customer service, and promptly answered all of my questions, and they got my bumper shipped fast.
It looks great on my truck little hard to put on but it looks great
Fits perfectly
Dem bumpers is bumping’ boi!!!
Great bumper extra thick material high quality paint and love the fact they have pre drilled holes for lights and in the step wells