Before ordering a bumper for your Ford Super Duty, you need to know your truck’s generation. Even small year differences can mean completely different fitment.
Browse all available options here: Ford Super Duty bumpers
Which bumper fits my Ford Super Duty?
The Ford Super Duty has gone through six distinct generations, and each one uses a completely different bumper design.
| Year | Generation | Compatible With |
|---|---|---|
| 1999–2004 | 1st Generation | 1999–2004 only |
| 2005–2007 | 1st Gen Refresh | 2005–2007 only |
| 2008–2010 | 2nd Generation | 2008–2010 only |
| 2011–2016 | 3rd Generation | 2011–2016 only |
| 2017–2022 | 4th Generation | 2017–2022 only |
| 2023–2026 | 5th Generation | 2023–2026 only |
Important: A 2016 bumper will NOT fit a 2017. A 2022 bumper will NOT fit a 2023. Each redesign includes changes to frame mounting, body dimensions, and electronics.
Exception: Rear bumpers for 1999–2007 models share the same mounting points and can interchange. This does not apply to front bumpers.
1999–2004 Ford Super Duty (1st Generation)
What fits
Only bumpers designed for 1999–2004 models. These trucks use simple, bolt-on mounting with no sensors or electronics.
What doesn’t cross over
Does not fit 2005–2007 models due to a redesigned front end.
Key notes
-
No cameras or parking sensors
-
Straightforward installation (2–4 hours DIY)
-
Rear trailer plug is bumper-mounted and must be transferred
Shop 1999–2004 Ford Super Duty bumpers
2005–2007 Ford Super Duty (1st Gen Refresh)
What fits
Only 2005–2007 bumpers fit this refreshed design.
What doesn’t cross over
1999–2004 front bumpers will not fit due to grille and headlight changes.
Key notes
-
Some early 2005 trucks may still use the older 1999–2004 front end
-
Rear bumpers (1999–2007) are cross-compatible
Browse 2005–2007 Super Duty bumpers
2008–2010 Ford Super Duty (2nd Generation)
What fits
Only 2008–2010 bumpers fit due to a full redesign.
What doesn’t cross over
No compatibility with previous generations, including rear bumpers.
Key notes
-
New frame and body design
-
Some models include rear parking sensors
-
Multi-piece factory bumper requires full removal during install
Shop 2008–2010 Ford Super Duty bumpers
2011–2016 Ford Super Duty (3rd Generation)
What fits
Only 2011–2016 bumpers fit this generation.
What doesn’t cross over
Does not fit 2017+ models due to major structural changes.
Key notes
-
No front camera or adaptive cruise
-
Optional rear parking sensors
-
Basic CANBUS system
View 2011–2016 Ford Super Duty bumpers
2017–2022 Ford Super Duty (4th Generation)
What fits
Only 2017–2022 bumpers fit this generation due to a complete redesign.
What doesn’t cross over
No compatibility with 2011–2016 or 2023+ models.
Sensor and camera notes
-
Front camera and parking sensors are common
-
Adaptive cruise control may require recalibration
- Camera-compatible bumpers are required if equipped
Shop 2017–2022 Ford Super Duty bumpers
Do I need a camera-compatible bumper for a 2017+ Super Duty?
Yes, if your truck has a front camera, you need a camera-compatible bumper. Standard bumpers will not include the correct mounting provisions. Most camera relocations are simple plug-and-play and add about 15–30 minutes to installation.
Can I wire aftermarket lights into the factory fog light circuit?
No. On 2017+ trucks, the CANBUS system will trigger errors or shut down the circuit.
Use a relay harness connected directly to the battery and trigger it using factory upfitter switches.
2023–2026 Ford Super Duty (5th Generation)
What fits
Only 2023–2026 bumpers fit this newest generation.
What doesn’t cross over
Not compatible with 2017–2022 models.
Key notes
-
Expanded use of cameras and sensors
-
Adaptive cruise and 360° cameras common
- Same advanced CANBUS considerations as 2017+
Browse 2023–2026 Ford Super Duty bumpers
Does a 2016 Ford Super Duty bumper fit a 2017?
No. The 2017 model was a complete redesign with a new aluminum body, updated frame geometry, and wider front end. Nothing from 2011–2016 fits 2017–2022 trucks.
Do the F250 and F350 use the same bumper?
Yes, for the front bumper. F250, F350, F450, and F550 all share the same front bumper within each generation.
For rear bumpers:
-
SRW (single rear wheel): same bumper
-
DRW (dually): requires a wider, specific rear bumper
Does engine type affect bumper fitment?
No. Gas and diesel trucks use the same frame mounting points within each generation, so bumper fitment is identical.
Does cab size affect bumper fitment?
No. Regular Cab, SuperCab, and Crew Cab all use the same bumper. Cab size does not affect mounting points.
Common fitment mistakes for Ford Super Duty
Avoid these common mistakes when ordering a bumper:
-
Ordering across generations (most common issue)
-
Not checking camera or sensor compatibility on 2017+ models
-
Confusing early 2005 trucks with later 2005–2007 models
-
Wiring lights incorrectly into CANBUS systems
-
Choosing non-winch bumpers when a winch setup is needed
Ready to Find the Right Ford Super Duty Bumper?
Browse all Ford Super Duty bumpers: Shop now
📞 Call us: +1-832-998-8096
🕒 Monday–Friday, 9AM–5PM CST
Not sure what fits your truck? Contact our team — our fitment experts will help you get it right the first time.
