Fab Fours Vengeance Front Bumper Center Light Cover M2450-1
Put this bumper on my 2020 GMC sierra 3500 AT4, it fits great and feels really solid. Installation instructions are a little difficult to decipher, hardest part is taking off the factory bumper but actual installation is not complicated and completed with the help of just one friend. From time of order to delivery was about 4 days which was unexpected and awesome, especially living in the middle of Wyoming. Bumper arrived with all hardware and in perfect condition.
John,
Thank you for the detailed review! We're thrilled to hear the bumper fit your 2020 GMC Sierra 3500 AT4 perfectly and that you're happy with its solid build. We appreciate your feedback on the installation instructions — we'll definitely take that into account for future improvements. It's great to know shipping exceeded expectations, especially out to Wyoming! Thanks again for your support, and enjoy that new bumper!
BUMPERONLY TEAM
Great bumper. Did show up with scratches unfortunately. Shipping issue. No complaints. Great customer service
Clint,
Thank you for your feedback and for taking the time to leave a review! We’re glad to hear you’re happy with the bumper and our customer service team.
We’re sorry it arrived with some scratches — shipping issues can sometimes happen despite our best efforts, and we appreciate your understanding and patience. We will be arranging a good doscount in your next purchase.
If there’s ever anything else you need or if we can assist you further, please don’t hesitate to reach out.
Thanks again for choosing us, and we hope you enjoy your new bumper for years to come!
Best regards,
BUMPERONLY TEAM
Bumper is great, exactly what it says it is, solid, heavy, fits perfectly, but installation is a bit of a pain, partly because instructions are not fully clear and missing important steps to actually remove stock parts smoothly. Removing the electrical harness, the harness prep, and reinstall is also a pain, probably the worst part. You will also need a second person to help with the final install due to the weight, one holds while the other bolts down. Ive had it installed for 2 months so my memory of everything i had issues with during installation is a little faded to point out every step that needs to be explained better or just completely added, but i did break my front camera harness while removing the front grill, so make sure you remove very gently and unclip its harness, just pulling the grill a few inches from the front end will cause it to snap, and the 5 inch harness alone will run you $121 from Ford. 5 stars for the bumper, i love it. Its bad ass. 1 star for installation process and instructions, just blows, but worth, just be prepared lol.
Hello Nathan,
Thank you so much for your detailed feedback and for taking the time to leave a review! We're thrilled to hear that you love the bumper and that it's living up to your expectations in terms of quality, fit, and overall look — that's exactly what we aim for.
We also truly appreciate your honest comments about the installation process. We understand how frustrating it can be when instructions aren't as clear as they should be, especially with a heavy and complex install like this one. Your notes about the electrical harness removal, the need for a second person, and the extra caution needed around the front camera harness are extremely helpful. We'll be taking your feedback seriously as we work on improving our instructions and installation support materials for future customers.
We're sorry to hear about the damage to your camera harness — that's definitely a painful lesson, and we’ll make sure to include a specific caution in future updates.
Thanks again for sharing your experience and for sticking with it through the install. We’re thrilled to know you feel the bumper was worth it! If you ever need anything or have any further feedback, don't hesitate to reach out — we're always here to help.
Enjoy your badass setup!
Best regards,
BUMPERONLY TEAM
So...yeah...Bought the '24 F-350 SuperDuty XLT with the 6.7L Powerstroke.
Pulling our RV down the Oregon coast, and out from the trees walks an Elk. It's kinda like a horse with Antlers. No, we didn't meet, but the thought definitely went through my mind. That's when I started the search for something that would help me, us, the truck, survive.
It came on a wooden pallet, and sat in the rain and snow until March...(Oregon). Got some friends at GP Muffler and Hitch to mount it for me, and put some 3x3 cubes in the bottom corners. Wow...really changes the look and stance.
Bumperonly.com were great. Walked me through, told me what to expect. Those folks are fantastic.
Really don't want to meet an Elk on the road...but now..um, still don't... unless he's watching me drive by.
Mark,
Thank you for sharing your story — we couldn't help but smile reading it! We’re really glad to hear you’re happy with your new bumper and that it’s giving you extra confidence out there, especially with the kind of encounters the Oregon coast can throw your way.
It sounds like you’ve got a great setup now with the bumper and the added lighting. We’re proud to have been part of helping you, your truck, and your adventures stay a little safer. Thank you as well for the kind words about our team — it truly means a lot to us.
Wishing you safe travels, clear roads, and plenty of elk-free driving!
Best regards,
BUMPERONLY TEAM