Love it
Well built and looks great. Installation was somewhat easy, did it by myself with a little help from my loader tractor in roughly 5 hrs. Only issue was instructions, being very vague on lower mounts, also missing some bolts. I also installed the winch mount.
I didn't remove bumper completely, slid it forward enough to get new brackets in. Hung the grille guard from upper bolts squared up as good as I could and snugged up bolts to hold in place. Then took a straight edge on inner side and marked lower air dam, measured in 3/8" and used a occulating cutter to notch it out, about 4". See pictures.
Tim,
We appreciate you sharing your installation experience and helpful tips especially your notes on the lower mounts and air dam modification. Your feedback about the instructions and missing bolts is valuable, and weâll share this with our team to improve future installations.
Thanks again for choosing BumperOnly and for including photos, we truly appreciate your support!
BUMPERONLY TEAM
The bumper is well built. Clean welds. The powder coating coverage looks good. I really like the removable panel to get to the top of the winch and controls. As with most things the installation instructions were not great. Overall very satisfied and it looks good
Marshall,
Thank you for the great feedback!
Weâre glad to hear youâre happy with the build quality.
We also appreciate your honest note about the installation instructions. That feedback helps us improve, and weâll be sharing it with our team.
Thanks again for your support weâre thrilled youâre overall satisfied and loving the look!
BUMPERONLY TEAM
If you donât have all the tard sensors, donât take the entire front of the truck apart to install the Bumper. Just bolt on the brackets and bumper. FYI
Michael,
Thanks for the helpful tip and for choosing the Steel Craft Moose Catcher for your Trail Boss!
Youâre absolutely right if the truck isnât equipped with front parking/radar sensors, thereâs no need to fully disassemble the front end. In those cases, it can be a straightforward bracket-and-bumper install. We appreciate you sharing that insight, itâll definitely help other customers.
Thanks again for the feedback and support!
BUMPERONLY TEAM
Ranch Hand FBF201BLR 2017-2022 Ford F250/F350 Superduty Legend Front Bumper
Jayden,
Thank you so much for the 5-star review! Weâre thrilled to hear youâre happy with your BumperOnly purchase. Your support means a lot to us, and we canât wait to see your rig in action.
Thanks again for being part of the BumperOnly community!
BUMPERONLY TEAM